DECODER ERROR MESSAGES
While some of these error messages are intended for the UEC decoder
they appear to be common to some other decoders used by the Pay TV
industry for satellite reception.
(Pace error codes down the page - below the UEC error codes)
E03 CA module
failure
(Great for UEC - they only have a built in CAM)
E04 Please reset
smartcard .......... The smartcard in not inserted or a SSD is not
recognised
E05 Unknown card
.................... The smartcard is not applicable to
this system
E06 Smartcard failure
............... (You have cooked
it)
E07 Checking Smartcard .............. If after 30 seconds
the message still appears re-insert card
E08 CA module failure
...............
E09 CAD EEPROM error ...............
The smartcard is malfunctioning
E11 Updating CAD EEPROM
.......... The decoder is briefly checking smartcard - can take 60
seconds
E12 CAM failure
E13 CAM failure
E14 Service
is currently scrambled .. Transmission problem .. wait for transmission
resumption - also means timezone blocked
E15 Not used at
present
E15 Smartcard error ................ Smartcard is
damaged
E16 Service is currently scrambled .. Access to the
service is denied
E17 Service is currently scrambled .. Access to
the service is denied
E18 Unknown card ...................
The smartcard is not applicable to this system
E19 Service is currently
scrambled .. Access to service denied .. subscription problem
E20
Service is currently scrambled .. Access to service denied
E21
Service is currently scrambled .. Access to service denied
E22
Event Purchased
E23 Preview period
E24 Service is currently
scrambled .. Access to service denied also can mean smartcard not
compatible
E25 Event already purchased
E26 Event for sale
cheap ........ Special of the day (Not the 2000
Olympics)
E27 No further purchases possible ... Event limit
reached
E28 Credit limit reached ,,,,,,,,,,,, Entitlement credits
to smartcard exhausted
E30 Service is currently scrambled ..
Access to service denied
E31 Service is currently scrambled ..
Access to service denied
E32 Service is currently scrambled ..
Access to service denied
E34 Service is currently scrambled ..
Access to service denied . Unplug and re-insert CAM (does not apply to
UEC)
E35 Service is currently scrambled .. Access to service
denied
E37 Service unknown
................. System error
E38
Service is currently not running Service is being used for a special
event
E39 Locating service
................ The decoder is busy
locating a service.
E40 IRD memory full
................. System error
E41
Service is not currently available The programme has been blocked by means
of Program Blocking - reassign blocking level.
E42 Parental Control
Lock ............ The service has been blocked - Reset
blocking level if required
E43 Not allowed in this country
...... Wrong smartcard for this service
E45 Service
is not allowed ........... T he satellite dish is not receiving a
signal
E46 Reading satellite information ,,,,
E47 No
soundtrack available .......... An unavailable language has
been selected
E49 LNB overload detected ............
Installation fault, check for short circuits.
E50 No service
available
E53 Incorrect PIN
E54 IPPV OK
E55 No event
information found
E64 Invalid tuning parameters
========================================================
========================================================
Pace Error Codes that may appear on the
Monitor/Television
E03 CA module failure
E04 Please reset smartcard Smartcard not inserted
E05 Unknown Card Smartcard not applicable to this system
E05 Unknown
Card (Pace)
E06 Smartcard Failure The smartcard has died
E07 Checking
Smartcard
E08 CA module failure
E09 CAD EEPROM error Malfunctioning
Smartcard
E10 Service is currently scrambled (Pace) Timezone Blocked
E11
Updating CAD EEPROM Checking Smartcard
E12 CAM Failure
E13 CAM Failure
E14 Service is currently scrambled (Pace) Transmission Problem
E15
Smartcard error damaged smartcard
E16 Service is currently scrambled Access
Denied
E17 Service is currently scrambled Access Denied
E18 Unknown Card
Smartcard not applicable to this system
E19 Service is currently scrambled
Access Denied - Subscription Problem
E20 Service is currently scrambled
Access Denied
E21 Service is currently scrambled Access Denied
E22 Event
Purchased PPV Event Purchased
E23 Preview Period
E23 Service Invalid
(Pace) False or wrong smartcard
E24 Service is currently scrambled Access
Denied - Smartcard may not be compatible
E24 Service is currently scrambled
(Pace) Access Denied - Smartcard may not be compatible
E25 Event already
purchased
E26 Event for sale cheap
E27 No further purchases possible
Event Limit reached
E28 Credit Limit Reached Credits exhausted
E30
Service is currently scrambled Access Denied
E31 Service is currently
scrambled Access Denied
E32 Service is currently scrambled Access Denied
E34 Service is currently scrambled Access Denied - re-insert CAM
E35
Service is currently scrambled Access Denied
E37 Service Unknown System
Error
E38 Service is currently not running Service is used for special event
E39 Locating service Decoder is locating a service
E40 IRD memory full
System error
E41 Service is not currently available The programme has been
blocked by means of Program Blocking Reassign blocking level
E42 Parental
Control Lock Service has been blocked
E43 Not allowed in this country Wrong
Smartcard
E45 Service is not allowed Satellite Dish not recieving signal
E46 Reading Satellite Information
E47 No soundtrack available
Unavailable Language
E49 LNB Overload detected Installation Fault
E50 No
Service Available
E53 Incorrect PIN
E54 IPPV OK
E55 No event
information found
E64 Invalid tuning parameters
EIE Service is currently
scrambled (Pace) Invalid Key
EFI Service is currently scrambled (Pace)
Invalid Key
EFE Service is currently scrambled (Pace) Invalid Key
Thanks to CMOORE for the above PACE screen
messages,
-----------------------------------------------------
UPGRADE ERROR MESSAGES (displayed on front panel of the decoder - NOT on
screen)
E80 .... NO ERROR (never actually displayed)
E81 ....
SELFTEST_ERROR
E32 .... RAMTEST_ERROR
E33 .... DOWNLOAD_HEADER_
ERROR
E84 .... DOWNLOAD_ID_ERROR
E85 .... INCORREOT_DECODER_ID
E86 ....
INCORRECT_SW_VERSION
E87 .... INCORRECT_HW_VERSION
E88 ....
INCORRECT_MEMORY_TYPE
E89 .... PARTITION_HEADER_ERROR
E8A ....
PARTITION_ID_ERROR
E8B .... PARTITION_CCRC_ERROR
E8C ....
PARTITION_OCRC_ERROR
E8D .... FLASH ERASE ERROR
E8E .... FLASH PROG
ERROR
E8F .... FLASH CRC ERROR
E90 .... DATAGRAM_DATA_ERROR
E91 ....
ERROR_SAME_SW_VERSION
E92 .... DATAGRAM_ID_ERROR
E93 ....
CODEVERI_ERROR
E94 .... DCOMP_ERROR
E95 .... SECURITY_ERROR
E96 ....
EEPROM_PROG_ERROR
E97 .... LIMITS_ERROR
E98 ....
FLASH_VER_CONTROL_ERROR
E99 .... EEPROM_CA_PROG_ERROR
E9A .... DEMOD
TUNE_ERROR
E9B .... UART_TIMEOUT_ERROR
E9C .... INVALID_TEXL_LENGTH
E9D
.... CLEAR_LOAD_NOT_ALLOWED
E9E .... KEYVERI_OK
E9F ....
KEYVERI_ERROR
EA0 .... ERROR_INVALID_SIGNATURE
EA1 .... ERROR
INVALID_SIG_LENGTH
EA2 .... ERROR_CANNOT_FIND_BAT
EA3 ....
ERROR_CANNOT_FIND_NIT
EA4 .... ERROR_CANNOT_FIND_PAT
EA5 ....
ERROR_CANNOT_FIND_PMT
EA6 .... ERROR_CANNOT_FIND_DLC
EA7 .... ERROR
BAT_ERROR
EA8 .... ERROR_NIT_ERROR
EA9 .... ERROR_PAT_ERROR
EAA ....
ERROR_PMT_ERROR
EAB .... ERROR_DLC_ERROR
EAC .... ERROR
INVALID_NETWORK_ID
EAD .... ERROR_SI_ERROR
EAE ....
ERROR_OTHER_TS_TUNE
EAF .... ERROR_INVALID_EE_TS
EB0 ....
ERROR_FORCED_NOT_ALLOWED
EB1 .... ERROR_SIGNAL_FAILED
EB2 ....
CODEVERI_EEPROM_KEY_ERR
EB3 .... CODEVERI_CONTROL_ERROR
EB4 ....
CODEVERI_SIG_TYPE_ERROR
EB5 .... KEY_DCHIP_LOAD_ERROR
EB6 ....
RAW_DATA_LENGTH_ERROR
KEY
SAT = bouquet allocation table
NIT = network
information table
PAT = program association table
PMT = program map
table
DLC = download code
TS = transport stream
DCHIP = transport
demultiplexer
Service Manual Issue 2 13.06.96
Remember to subtract 80 hex from these values if attempting the RS-232
upgrade with TEMU.
Thanks to Hacktech for the UPGRADE ERROR MESSAGES
- Your feedback