Unlock Sony DVD players - DVD hack - code free - change region code

Sony Playstation 2 / SCPH 10000

Method 1

1. Press and hold CIRCLE, RIGHT and L1.
2. Press and hold L3 and push the stick in hard.
3. Boot into the PS2 browser without a CD/DVD in the tray.
4. Press CIRCLE and R1 on the DVD
5.  Hold RIGHT until a menu appears.
6. Press CIRCLE and R1 again.

Method 2:

1. Load the DVD into the PS2.
2.  At the browser screen, select the CD icon the press and hold SQUARE then CIRCLE until the DVD menu appears, holding both buttons all of the time.
3.  Either select the PLAY icon or the MOVIE START icon.

Sony Playstation 2

Have a Messiah 2 or Magic 2 chip installed.

Sony SLV D 900 / SLV-D900E  (Temp hack)

  1. turn the player on (without a disc inserted)
  2. press "Subtitle", "3", "8", "7", "6", "7"
  3. current RC should be displayed
  4. press "9"
  5. this has to be done every time you restart the player
 
 

Sony DVP-F21 DVP-LS500 / DVP-LS755 / DVP-LS785 / DVP-NC615 / DVP-NS52 / DVP-NS300 / DVP-NS305 / DVP-NS310 / DVP-NS315 / DVP-NS330 / DVP-NS333 / DVP-NS355 / DVP-NS360 / DVP-NS400 / DVP-NS405 / DVP-NS410 / DVP-NS430 / DVP-NS433 / DVP-NS575 / DVP-NS585 / DVP-NS590 / DVP-NS700 / DVP-NS730 / DVP-NS765 / DVP-NS900 /DVP-NS905 / DVP-NS930 / DVP-NS955 / DVP-PQ1 / DVP-PQ2 / RDR-GX3 / RDR-GX7 / RDR-GX300 / RDR-GX700 / RDR-GXD500 / RDR-HX900 / RDR-HX1000  - Probably works with most other models not listed

Please note that, some players do not display "success" when hacked.
The infrared service codes required to make the update are available on the Internet. Unfortunately, not many people have an appropriate device to enter the codes into. You basically need a programmable remote (Philips Pronto, One-For-All) or a PDA (Palm, iPAQ) with suitable software.
This guide shows you how to make the update with a regular PC equipped with an IRDA port.

1. Download the winsamp -package from Blank Franks site.
This innovative piece of software allows you to send standard home electronics IR signals using a PC IRDA port.
2. Extract the package onto a bootable DOS floppy disk.
3. Save the following code into a file named "REMOTE.TXT" and put it in the same and place it in the same directory as the package above. 

"Sony Region Free Code 1",84,24,6,12,6,12,6,12,6,12,6,12,6,12,6,12,6,6,6,12,6,6,6,12,6,12,6,12,6,6,6,6,6,12,6,6,6,6,6,12,6,6,117,24,6,12,6,12,6,12,6,12,6,12,6,12,6,12,6,6,6,12,6,6,6,12,6,12,6,12,6,6,6,6,6,12,6,6,6,6,6,12,6,6,117
"Sony Region Free Code 2",84,24,6,12,6,6,6,12,6,6,6,6,6,12,6,12,6,6,6,12,6,6,6,12,6,12,6,12,6,6,6,6,6,12,6,6,6,6,6,12,6,6,118,24,6,12,6,6,6,12,6,6,6,6,6,12,6,12,6,6,6,12,6,6,6,12,6,12,6,12,6,6,6,6,6,12,6,6,6,6,6,12,6,6,118
"Sony Region Free Code 3",84,24,6,12,6,6,6,12,6,6,6,12,6,6,6,12,6,6,6,12,6,6,6,12,6,12,6,12,6,6,6,6,6,12,6,6,6,6,6,12,6,6,118,24,6,12,6,6,6,12,6,6,6,12,6,6,6,12,6,6,6,12,6,6,6,12,6,12,6,12,6,6,6,6,6,12,6,6,6,6,6,12,6,6,118
"Sony Region Free Code 4",84,24,6,12,6,12,6,12,6,12,6,12,6,6,6,12,6,6,6,12,6,6,6,12,6,12,6,12,6,6,6,6,6,12,6,6,6,6,6,12,6,6,117,24,6,12,6,12,6,12,6,12,6,12,6,6,6,12,6,6,6,12,6,6,6,12,6,12,6,12,6,6,6,6,6,12,6,6,6,6,6,12,6,6,117
"Sony Region Free Code 5",84,24,6,12,6,6,6,12,6,6,6,12,6,6,6,6,6,6,6,12,6,6,6,12,6,12,6,12,6,6,6,6,6,12,6,6,6,6,6,12,6,6,118,24,6,12,6,6,6,12,6,6,6,12,6,6,6,6,6,6,6,12,6,6,6,12,6,12,6,12,6,6,6,6,6,12,6,6,6,6,6,12,6,6,118
4. Boot up your PC from the floppy disk and run winsamp.exe.
If your IRDA port doesn't appear as COM2 you may override this by using an appropriate command line switch. For example, use COM1 by running 'winsamp C1'.
5. Press the 'r' key to load up the codes into winsamp.
6. Make sure your DVD player is in standby mode and your IRDA port is within range.
7. Run the IR codes from 1 to 5 by pressing Enter on each corresponding button.
8. Your DVD player should start up and display the text "SUCCESS".
9. Repeat step 7. Your player should return to standby mode.
Your player is now multi-region.




PAGE 1 HACK FOR Sony DVP-NS******

PAGE 2 HACK FOR Sony DVP-NS700V AND NS900V For alternative method using HEX codes